Product Description
High-Performance Duplex and Super Duplex Pipe Spool Manufacturing by Womic Steel Group
Womic Steel Group is a professional manufacturer and international supplier of duplex stainless steel pipe spools, super duplex stainless steel piping assemblies, prefabricated offshore piping systems, and customized corrosion-resistant industrial pipe spools.
Our manufacturing capabilities cover duplex stainless steel grades such as UNS S31803 and UNS S32205 (2205), together with super duplex stainless steel grades including UNS S32750 (2507) and UNS S32760.
These materials are widely specified for demanding industrial environments where conventional austenitic stainless steels may not provide sufficient resistance to localized corrosion, chloride-induced stress corrosion cracking, or high mechanical loading.
Duplex and super duplex stainless steel pipe spools are particularly important in offshore oil and gas production, floating production storage and offloading facilities (FPSO), seawater cooling systems, desalination plants, chemical processing facilities, and other applications involving chloride-containing environments.
Unlike ordinary carbon steel piping, duplex stainless steel fabrication requires careful control of material chemistry, welding consumables, welding heat input, interpass temperature, shielding and purging conditions, ferrite-austenite phase balance, and corrosion performance.
Womic Steel operates its own pipe spool fabrication facility with an annual manufacturing capacity of approximately 20,000 metric tons, supported by more than 50 internationally qualified welders.
Our in-house manufacturing system enables closer coordination of material procurement, fabrication drawings, welding procedures, inspection activities, production scheduling, and final shipment.
We manufacture duplex and super duplex stainless steel pipe spools according to approved isometric drawings, material specifications, welding procedure requirements, inspection and test plans, and applicable international piping codes.
Our objective is to supply reliable prefabricated piping assemblies that meet demanding project requirements while helping EPC contractors, shipyards, offshore operators, and industrial customers reduce on-site welding and improve installation efficiency.
Duplex and Super Duplex Stainless Steel Pipe Spool Product Range
Womic Steel manufactures a wide variety of duplex and super duplex piping assemblies according to customer drawings and project specifications.
|
Product Category |
Manufacturing Description |
| Duplex 2205 Pipe Spools | Prefabricated piping assemblies manufactured from UNS S31803 or S32205 materials |
| Super Duplex 2507 Pipe Spools | High-alloy piping assemblies manufactured from UNS S32750 materials |
| UNS S32760 Pipe Spools | Customized super duplex piping for specified offshore and corrosive environments |
| Seawater Piping Spools | Fabricated piping assemblies for compatible seawater handling and cooling applications |
| Offshore Process Pipe Spools | Duplex and super duplex piping for offshore processing and utility systems |
| Flanged Duplex Pipe Spools | Pipe sections incorporating compatible duplex or super duplex flanges |
| Duplex Elbow and Reducer Spools | Assemblies incorporating butt-welding elbows, reducers, and other fittings |
| Branch and Tee Spools | Complex piping configurations incorporating branch connections |
| Duplex Headers and Manifolds | Customized multi-branch piping distribution assemblies |
| Large-Diameter Duplex Pipe Spools | Engineered large-bore corrosion-resistant piping sections |
| Heavy-Wall Duplex Pipe Spools | Thick-wall piping assemblies manufactured according to qualified welding procedures |
| Modular Offshore Piping Assemblies | Multiple prefabricated spool sections organized for offshore installation |
Fabrication can include straight pipe sections, complex elbows, offset piping, flanged connections, branch outlets, and customized three-dimensional configurations.
For large-diameter, heavy-wall, or oversized assemblies, Womic Steel reviews the project drawings, welding access, inspection requirements, handling conditions, and transportation limitations before confirming the manufacturing arrangement.
Duplex 2205 and Super Duplex 2507 Material Grades
Duplex stainless steels have a mixed ferritic-austenitic microstructure. Their combination of mechanical strength and corrosion resistance makes them suitable for selected aggressive industrial environments.
Super duplex stainless steels generally contain higher levels of alloying elements, providing enhanced resistance to localized corrosion in many chloride-containing environments.
However, material selection must always be based on actual operating conditions, temperature, pressure, chloride concentration, pH, oxygen availability, and other relevant service factors.
Main Duplex and Super Duplex Material Grades
|
Material Grade |
UNS Designation |
Material Family |
Typical Application |
| Duplex 2205 | S31803 | Duplex stainless steel | Chemical processing, industrial utilities, selected seawater systems |
| Duplex 2205 | S32205 | Duplex stainless steel with tighter composition limits | Offshore piping, process systems, chloride-containing environments |
| Super Duplex 2507 | S32750 | Super duplex stainless steel | Offshore seawater systems, high-chloride environments, desalination |
| Super Duplex | S32760 | Super duplex stainless steel | Offshore and marine piping, demanding corrosion-resistant applications |
UNS S31803 and S32205 are closely related duplex grades, but their chemical composition requirements are not identical. Material substitution should be approved by the project engineering team.
Likewise, UNS S32750 and S32760 are different super duplex grades and should not be treated as automatically interchangeable.
Applicable Material Specifications
Womic Steel can coordinate materials manufactured according to the applicable product specifications, including:
- · ASTM A790 / ASME SA790: Seamless and welded ferritic/austenitic stainless steel pipe.
- · ASTM A928 / ASME SA928: Electric-fusion-welded ferritic/austenitic stainless steel pipe with filler metal.
- · ASTM A815 / ASME SA815: Wrought ferritic, ferritic/austenitic, and martensitic stainless steel piping fittings.
- · ASTM A182 / ASME SA182: Forged or rolled alloy and stainless steel flanges, fittings, and other components.
- · ASTM A240 / ASME SA240: Chromium and chromium-nickel stainless steel plate, sheet, and strip, where relevant to fabricated components.
- · EN 10216-5 / EN 10217-7: Applicable stainless steel tube specifications for projects requiring European standards.
The correct material specification, grade, product form, and manufacturing condition are confirmed against the project bill of materials and piping class.
Corrosion Resistance and Mechanical Performance
Duplex and super duplex stainless steels are selected because they combine relatively high strength with resistance to several important corrosion mechanisms.
Resistance to Chloride-Induced Stress Corrosion Cracking
Duplex stainless steels generally provide better resistance to chloride-induced stress corrosion cracking than common 300-series austenitic stainless steels under many relevant service conditions.
This advantage makes them useful for selected seawater and chloride-containing process systems.
However, duplex materials are not immune to stress corrosion cracking, and suitability must be assessed against the actual environment.
Pitting and Crevice Corrosion Resistance
Pitting and crevice corrosion are important concerns in seawater and chloride-containing environments.
Super duplex stainless steels generally offer higher resistance to localized corrosion than standard duplex grades because of their alloy composition.
The final corrosion performance also depends on manufacturing quality, weld metallurgy, surface condition, temperature, and service environment.
High Mechanical Strength
Duplex and super duplex stainless steels generally provide higher specified yield strength than common austenitic stainless steel grades.
This can offer engineering advantages in certain piping systems, subject to applicable design rules and corrosion allowance requirements.
Pitting Resistance Equivalent Number (PREN)
PREN is a commonly used composition-based indicator for comparing the potential resistance of stainless steels to pitting corrosion.
A widely used formula is:
PREN = %Cr + 3.3 × %Mo + 16 × %N
For tungsten-containing grades, an alternative formula may be specified by the governing standard or project specification.
PREN is a useful material comparison tool, but it is not a substitute for corrosion testing or service-specific material selection.
Duplex and Super Duplex Pipe Spool Fabrication Standards
Womic Steel manufactures duplex stainless steel pipe spools according to the approved design code, material specifications, welding qualifications, and inspection requirements.
|
Standard |
Application |
| ASME B31.3 | Process piping fabrication, examination, and testing |
| ASME B31.1 | Power piping requirements where applicable |
| ASME BPVC Section IX | Welding procedure and welder qualification |
| ASTM A790 / ASME SA790 | Duplex stainless steel pipe |
| ASTM A928 / ASME SA928 | Electric-fusion-welded duplex stainless steel pipe |
| ASTM A815 / ASME SA815 | Duplex and super duplex stainless steel fittings |
| ASTM A182 / ASME SA182 | Forged stainless steel piping components |
| ASME B16.5 | Pipe flanges and flanged fittings |
| ASME B16.9 | Factory-made wrought butt-welding fittings |
| ASME B16.25 | Butt-welding end preparation |
| ASTM G48 | Laboratory testing of resistance to pitting and crevice corrosion |
| ASTM A923 | Detection of detrimental intermetallic phases in specified duplex stainless steels |
| ISO 17781 | Quality control of microstructure of ferritic/austenitic stainless steels |
| NORSOK M-601 | Welding and inspection requirements for piping systems, where specified |
| EN 13480 | Metallic industrial piping, where applicable |
The applicable editions, testing methods, acceptance criteria, and additional requirements are established by the customer’s project specification.
Controlled Welding Procedures for Duplex Stainless Steel Pipe Spools
Welding duplex and super duplex stainless steels requires specialized attention to the resulting weld metal and heat-affected zone microstructure.
The objective is to achieve welded joints with the required mechanical properties and corrosion resistance while avoiding harmful metallurgical changes.
Womic Steel's manufacturing workshop is supported by more than 50 internationally qualified welders. Welding assignments are made according to the approved procedures and applicable personnel qualifications.
Welding Procedure Qualification
Before production, the welding engineering team reviews the material grade, pipe dimensions, welding process, consumables, shielding gas, heat input, interpass temperature, and inspection requirements.
Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR) must be suitable for the applicable materials and project requirements.
Welding Processes
Depending on the qualified procedure and joint configuration, duplex and super duplex piping may be welded using:
GTAW / TIG Welding: Commonly used for root passes and controlled piping welds, particularly where internal weld quality and shielding conditions are important.
SMAW Welding: Used for suitable piping joints with approved duplex or super duplex welding consumables.
GMAW / FCAW Welding: Applicable where supported by the qualified procedure and project specifications.
SAW Welding: May be used for appropriate large-diameter fabrication configurations when the welding procedure is qualified and metallurgical requirements are satisfied.
Welding Consumable Selection
Filler metals must be compatible with the specified base material and the required weld metal properties.
Duplex and super duplex filler metals are commonly designed to help achieve suitable weld metal phase balance and corrosion resistance.
The selected filler metal classification and chemical composition must conform to the qualified welding procedure and project requirements.
Heat Input and Interpass Temperature Control
Heat input control is particularly important during duplex and super duplex stainless steel welding.
Excessive or insufficient heat input can affect the weld and heat-affected zone microstructure, including the balance between ferrite and austenite.
Inappropriate welding thermal cycles may also promote undesirable phase formation or adversely affect corrosion performance.
Womic Steel evaluates welding parameters according to the qualified WPS and material requirements.
Important controls include:
1. Welding current and voltage.
2. Travel speed.
3. Heat input range.
4. Interpass temperature.
5. Welding sequence.
6. Shielding and backing gas conditions.
7. Joint cleanliness.
8. Filler metal selection.
9. Welding procedure qualification limits.
10. Inspection and testing requirements.
The acceptable heat input and interpass temperature limits are established by the approved welding procedure rather than applying a single generic value to all duplex grades.
Why Super Duplex Welding Requires Additional Attention
Super duplex materials such as UNS S32750 and S32760 contain higher alloy levels and may be more sensitive to inappropriate welding thermal cycles.
Careful process control is necessary to maintain the required weld properties and corrosion resistance.
The production team must also prevent contamination from carbon steel tools, grinding materials, and other sources that could damage stainless steel surfaces.
Ferrite-Austenite Phase Balance and Microstructure Control
The duplex microstructure is fundamental to the performance of these materials.
Duplex stainless steels contain both ferrite and austenite phases, and welding can change the local phase balance.
An unsuitable phase balance or the formation of detrimental intermetallic phases may reduce toughness and corrosion resistance.
For projects with microstructure requirements, inspection and testing may include:
- · Ferrite content measurement.
- · Metallographic examination.
- · Examination for detrimental intermetallic phases.
- · Corrosion testing.
- · Hardness testing.
- · Impact testing where specified.
The required ferrite range, examination location, method, and acceptance criteria are determined by the relevant material standard, welding qualification requirements, and project specification.
ASTM A923 Testing
ASTM A923 provides methods for detecting detrimental intermetallic phases in specified duplex stainless steel materials.
The applicable test method and acceptance criteria depend on the material grade, product form, and project requirements.
It should not be assumed that ASTM A923 is automatically applicable to every super duplex grade.
ISO 17781 Microstructure Requirements
ISO 17781 provides requirements for quality control of the microstructure of ferritic/austenitic stainless steels.
Where specified, the relevant examination and acceptance requirements can be incorporated into the project quality plan.
ASTM G48 Corrosion Testing for Duplex and Super Duplex Materials
Corrosion testing is often a critical requirement for offshore and seawater piping projects.
ASTM G48 provides laboratory test methods for evaluating the resistance of stainless steels and related alloys to pitting and crevice corrosion in ferric chloride solutions.
Depending on the project specification, testing may be required for base materials, welding procedure qualification specimens, or other specified samples.
Corrosion Testing Considerations
The test requirements may specify:
1. Material grade.
2. Test method.
3. Test temperature.
4. Exposure duration.
5. Sample preparation.
6. Surface condition.
7. Acceptance criteria.
8. Reporting requirements.
The specified test temperature and acceptance criteria must be taken from the applicable project requirements.
ASTM G48 testing is not a universal pass/fail certification for seawater service. It is one part of a broader material and welding qualification process.
For offshore projects, corrosion testing requirements may be combined with ferrite measurements, microstructure examination, and additional welding qualification tests.
Positive Material Identification and Material Segregation
Duplex and super duplex stainless steel materials can be difficult to distinguish by visual appearance.
Incorrect material identification can lead to serious project quality issues, especially when multiple stainless steel grades are used within the same facility.
Womic Steel can implement project-specific material verification and traceability procedures, including:
Incoming Material Verification: Checking material certificates, specifications, grades, and heat numbers.
Positive Material Identification: Verifying relevant alloying elements through appropriate PMI methods.
Material Segregation: Separating different stainless steel grades during storage and fabrication.
Identification Transfer: Maintaining traceability after cutting and machining operations.
Weld Traceability: Linking weld identification numbers to the approved welding and inspection records.
Final Spool Identification: Marking each completed assembly according to the project spool numbering system.
For grades where nitrogen content is critical, conventional handheld XRF testing alone is insufficient to verify nitrogen content. Suitable laboratory methods or material certification controls may be required.
This distinction is important because nitrogen contributes to the microstructure and corrosion performance of duplex stainless steels.
Surface Cleanliness and Contamination Prevention
Duplex and super duplex stainless steels require careful surface handling to preserve their corrosion-resistant properties.
Contamination from carbon steel tools, grinding dust, welding residues, and unsuitable handling equipment may adversely affect the finished surface.
Womic Steel can implement appropriate contamination prevention measures during fabrication.
These may include:
1. Dedicated or suitably cleaned stainless steel fabrication tools.
2. Controlled material storage and segregation.
3. Suitable grinding and finishing consumables.
4. Removal of welding discoloration where required.
5. Protection of machined flange surfaces.
6. Controlled cleaning and surface treatment procedures.
7. Final visual inspection before packaging.
Where specified, suitable pickling, passivation, or other approved surface cleaning processes may be arranged.
The selected treatment must be compatible with the material grade and project requirements.
For corrosion-critical service, surface cleanliness and weld finishing should be treated as part of the overall corrosion performance strategy.
Non-Destructive Testing and Quality Assurance
Duplex and super duplex piping projects may require extensive examination and documentation.
Womic Steel supports inspection activities according to the applicable code, approved ITP, and customer specifications.
|
Inspection / Test |
Purpose |
| Visual Testing (VT) | Examination of weld appearance and visible defects |
| Radiographic Testing (RT) | Examination of applicable welds for internal discontinuities |
| Ultrasonic Testing (UT) | Examination of applicable welds using specified techniques |
| Liquid Penetrant Testing (PT) | Detection of surface-breaking discontinuities |
| Positive Material Identification (PMI) | Verification of specified alloying elements |
| Ferrite Content Measurement | Verification of specified ferrite requirements |
| Microstructure Examination | Assessment of relevant metallurgical characteristics |
| ASTM G48 Corrosion Testing | Laboratory evaluation of pitting or crevice corrosion resistance |
| Hardness Testing | Verification against specified hardness requirements |
| Dimensional Inspection | Verification of spool geometry and connection dimensions |
| Hydrostatic Testing | Pressure integrity verification where required |
| Surface Condition Inspection | Examination of cleanliness and specified finishing requirements |
Not every test applies to every order.
The inspection method, examination percentage, acceptance criteria, and test responsibilities are agreed upon during the project technical review.
For critical offshore piping projects, Womic Steel can coordinate additional customer or third-party inspection activities.
Large-Diameter and Heavy-Wall Duplex Pipe Spool Fabrication
Large-diameter and heavy-wall duplex piping assemblies require careful planning because welding access, thermal control, distortion, and inspection requirements can become more complex as dimensions increase.
Womic Steel supports customized large-bore and heavy-wall duplex stainless steel pipe spool projects.
During technical review, our engineering and production teams evaluate:
- · Pipe outside diameter and wall thickness.
- · Material grade and product specification.
- · Welding joint configuration.
- · Welding consumables and process selection.
- · Heat input and interpass temperature requirements.
- · Weld access and NDT feasibility.
- · Dimensional tolerances.
- · Spool weight and handling requirements.
- · Surface treatment and preservation.
- · Export packaging and transportation dimensions.
Complex spool configurations can be manufactured according to approved fabrication drawings, subject to technical feasibility and workshop production arrangements.
Final manufacturing limits are confirmed based on the actual project requirements.
Offshore, Marine and Classification Society Project Support
Duplex and super duplex stainless steel piping is widely specified in offshore and marine projects because of its combination of mechanical strength and corrosion resistance.
Such projects may require detailed manufacturing documentation, approved welding procedures, additional corrosion testing, and independent inspection.
Womic Steel has experience with international classification society requirements and maintains referenced credentials associated with:
ABS, BV, DNV, LR, GL, RINA, CCS, KR and NK.
For applicable marine and offshore projects, our team can coordinate inspection arrangements and the preparation of relevant manufacturing records.
Typical documentation may include:
1. Material Test Certificates.
2. Approved fabrication drawings.
3. Welding Procedure Specifications.
4. Procedure Qualification Records.
5. Welder Qualification Records.
6. Weld maps and material traceability records.
7. PMI reports.
8. Ferrite measurement reports.
9. Corrosion test reports.
10. NDT reports.
11. Dimensional inspection records.
12. Pressure test reports where applicable.
13. Surface treatment records.
14. Third-party inspection reports.
15. Applicable classification society survey records or certificates.
Classification society certification is subject to the relevant society's current approval scope, manufacturing location, product category, inspection requirements, and project conditions.
Typical Applications of Duplex and Super Duplex Pipe Spools
Offshore Oil and Gas Platforms
Duplex and super duplex stainless steel pipe spools are used in selected offshore processing and utility systems where the specified corrosion resistance and mechanical properties are required.
Applications may include seawater handling, cooling systems, and other engineered piping services.
FPSO Facilities
Floating production storage and offloading facilities contain complex piping systems with demanding material, space, inspection, and installation requirements.
Prefabricated duplex piping assemblies can help reduce onboard fabrication and improve installation readiness.
Seawater Cooling Systems
Seawater cooling systems may expose piping materials to chloride-rich environments.
Duplex and super duplex grades can be considered according to seawater temperature, flow conditions, chlorination practices, crevice geometry, and other service factors.
Desalination Plants
Desalination projects may require corrosion-resistant piping for seawater intake, treatment, and selected process systems.
Material selection depends on the actual operating environment and system design.
Chemical Processing Facilities
Duplex stainless steel piping can be used in compatible chemical processing environments where its mechanical strength and corrosion resistance provide advantages.
Marine and Shipbuilding Projects
Marine piping systems may require duplex or super duplex materials for selected seawater-related applications.
Womic Steel can support project-specific fabrication and inspection requirements for suitable marine piping assemblies.
Industrial Water Treatment Facilities
Duplex stainless steel pipe spools may be specified for selected industrial water systems where chloride content or other corrosion conditions make conventional materials less suitable.
Production Capacity and Integrated Manufacturing Advantages
Womic Steel operates its own pipe spool fabrication facility with an annual capacity of approximately 20,000 metric tons.
Our manufacturing resources are supported by more than 50 internationally qualified welders, providing a foundation for project-specific welding and fabrication activities.
For duplex and super duplex piping projects, Womic Steel emphasizes coordination between material procurement, welding engineering, fabrication, inspection, and delivery.
In-House Manufacturing
Fabrication activities are performed within Womic Steel's own manufacturing facility, supporting direct production supervision and quality management.
Integrated Material Supply
Our steel pipe supply chain experience helps coordinate the procurement of pipes, fittings, flanges, and related piping components.
Project-Specific Quality Planning
Welding qualifications, corrosion testing, ferrite measurement, PMI, and NDT requirements can be incorporated into the agreed project inspection plan.
Flexible Production Scheduling
Production batches can be organized according to approved drawings, piping systems, installation priorities, and project delivery requirements.
International Project Experience
Womic Steel supports overseas customers with manufacturing documentation, export packaging, and logistics coordination.
Export Packaging and Global Transportation
Duplex and super duplex stainless steel pipe spools require careful packaging to prevent mechanical damage and surface contamination during transportation.
Womic Steel provides packaging arrangements according to spool dimensions, weight, surface condition, and project requirements.
Typical measures include:
1. Protective covers for flange faces.
2. Pipe end caps and temporary closures.
3. Suitable separation materials to prevent contact contamination.
4. Wooden supports or customized steel transport frames.
5. Protective wrapping for finished surfaces.
6. Temporary bracing for complex assemblies.
7. Spool identification tags and package markings.
8. Packing lists linked to project spool numbers.
For large and oversized assemblies, transportation may involve standard containers, open-top containers, flat-rack containers, or breakbulk shipment.
Womic Steel can coordinate international freight arrangements and phased deliveries based on project requirements.
Why Choose Womic Steel for Duplex and Super Duplex Pipe Spools?
|
Womic Steel Capability |
Customer Advantage |
| Dedicated In-House Pipe Spool Facility | Direct manufacturing and quality control |
| Approximately 20,000 MT Annual Fabrication Capacity | Production resources for industrial and offshore projects |
| More Than 50 Internationally Qualified Welders | Professional welding resources for customized piping assemblies |
| Duplex 2205 and Super Duplex 2507 Material Supply | Support for specialized corrosion-resistant piping projects |
| Controlled Welding Procedures | Fabrication according to approved welding requirements |
| Ferrite and Microstructure Testing Coordination | Support for project-specific metallurgical verification |
| ASTM G48 Corrosion Testing Arrangements | Support for specified corrosion qualification requirements |
| PMI and Material Traceability | Reduced risk of alloy material mix-ups |
| Offshore and Marine Inspection Experience | Support for applicable third-party and classification society requirements |
| Large-Diameter and Heavy-Wall Fabrication | Evaluation of demanding spool configurations |
| Export Packaging and Logistics | Organized international project delivery |
Womic Steel aims to provide reliable duplex and super duplex pipe spool manufacturing solutions through integrated material supply, controlled fabrication, inspection coordination, and international logistics support.
Request a Quotation for Duplex and Super Duplex Pipe Spools
Womic Steel welcomes inquiries from offshore EPC contractors, shipyards, FPSO project teams, engineering companies, desalination contractors, chemical processing facilities, and international piping distributors.
To prepare an accurate quotation, please provide:
1. Pipe spool isometric drawings or fabrication drawings.
2. Bill of materials and spool quantities.
3. Required material grades, such as UNS S31803, S32205, S32750, or S32760.
4. Pipe diameters, wall thicknesses, and fitting specifications.
5. Applicable design codes and project standards.
6. Welding procedure and welder qualification requirements.
7. Ferrite content and microstructure acceptance requirements.
8. ASTM G48 or other specified corrosion testing requirements.
9. PMI, NDT, and pressure testing requirements.
10. Third-party inspection or classification society certification requirements.
11. Surface finishing, cleaning, and packaging specifications.
12. Delivery schedule, destination port, and preferred Incoterms.
Our engineering and commercial teams will review the technical requirements and provide a suitable manufacturing and delivery proposal.
Womic Steel Group – Professional Duplex and Super Duplex Stainless Steel Pipe Spool Manufacturer for Offshore, Marine, Seawater and Industrial EPC Projects.
Contact Womic Steel
Website: www.womicsteel.com
Email: sales@womicsteel.com
Tel / WhatsApp / WeChat: Victor +86-15575100681 or Jack +86-18390957568










