Product Description
Precision Pipe Spool Manufacturing for Power Generation Projects
Womic Steel Group is a professional manufacturer and international supplier of power plant pipe spools, high-pressure steam piping assemblies, boiler piping components, prefabricated power station piping systems, and customized high-temperature industrial pipe spools.
We provide manufacturing solutions for thermal power stations, combined-cycle power plants, heat recovery steam generator (HRSG) installations, industrial boiler systems, and power generation EPC projects.
Power generation facilities require piping systems capable of operating under demanding combinations of pressure, temperature, thermal cycling, and mechanical loading.
Depending on the piping service, these systems may require carbon steel, low-alloy steel, advanced heat-resistant alloy steel, or stainless steel materials.
The fabrication of high-temperature and high-pressure piping assemblies requires careful control of material selection, welding procedures, joint preparation, preheating, interpass temperatures, post-weld heat treatment, non-destructive examination, dimensional accuracy, and manufacturing documentation.
Womic Steel operates its own dedicated pipe spool fabrication facility with an annual manufacturing capacity of approximately 20,000 metric tons, supported by more than 50 internationally qualified welders.
Our manufacturing capabilities cover customized piping assemblies manufactured according to approved engineering drawings, material specifications, welding requirements, inspection and test plans, and applicable international piping codes.
Through integrated pipe and fitting supply, in-house fabrication, welding quality management, heat treatment coordination, inspection arrangements, and international logistics experience, Womic Steel supports power generation contractors and industrial customers from technical review through final project delivery.
Power Plant Pipe Spool Product Range
Power stations contain extensive piping networks connecting boilers, turbines, heat exchangers, pumps, condensers, feedwater systems, and auxiliary equipment.
These systems require different piping materials, wall thicknesses, connection configurations, and inspection requirements.
Womic Steel manufactures customized power plant piping assemblies according to approved isometric drawings and project specifications.
|
Product Category |
Manufacturing Description |
| Main Steam Pipe Spools | Prefabricated piping assemblies for specified high-temperature steam systems |
| Hot Reheat Steam Pipe Spools | High-temperature alloy steel piping for applicable reheat steam service |
| Cold Reheat Pipe Spools | Piping assemblies for specified reheat system conditions |
| Boiler Feedwater Pipe Spools | High-pressure piping connections for boiler feedwater systems |
| High-Pressure Steam Headers | Customized steam distribution and collection piping assemblies |
| HRSG Pipe Spools | Piping assemblies for heat recovery steam generator installations |
| Turbine Connection Spools | Precision-fabricated piping connections for turbine-related systems |
| Condensate Pipe Spools | Piping for condensate collection and transfer systems |
| Auxiliary Steam Pipe Spools | Prefabricated piping for suitable auxiliary steam services |
| Cooling Water Pipe Spools | Large-diameter piping for appropriate cooling water applications |
| Heavy-Wall Alloy Steel Spools | Thick-wall piping requiring specialized welding and heat treatment |
| Large-Diameter Power Piping | Customized large-bore piping for power station systems |
| Flanged Power Plant Spools | Piping sections incorporating specified flanges and connection interfaces |
| Modular Power Plant Piping | Prefabricated assemblies for equipment modules and power generation skids |
Each spool is manufactured according to the approved material grade, design code, fabrication drawing, welding procedure, inspection requirements, and dimensional tolerances.
Main Steam Pipe Spool Fabrication
Main steam piping is one of the most demanding piping systems in many thermal power plants.
These piping systems transport high-temperature, high-pressure steam from the steam-generating equipment toward the turbine system.
The applicable material grade and pipe dimensions depend on the plant design, steam conditions, and governing engineering code.
For elevated-temperature applications, materials may include chromium-molybdenum alloy steels and advanced heat-resistant grades.
Main Steam Piping Manufacturing Requirements
Main steam pipe spool fabrication may require:
1. Verification of specified alloy steel material grades.
2. Review of material test certificates and heat treatment conditions.
3. Qualified welding procedures.
4. Controlled welding consumable selection.
5. Preheating and interpass temperature control.
6. Post-weld heat treatment where required.
7. Non-destructive examination.
8. Hardness testing where specified.
9. Dimensional inspection.
10. Complete material and weld traceability.
For advanced alloy grades, welding and heat treatment requirements are particularly important because the long-term performance of the welded joint depends on the resulting microstructure.
Womic Steel can coordinate the required manufacturing and inspection activities according to the approved project specifications.
Hot Reheat and Cold Reheat Piping Assemblies
Reheat piping systems are important components of many steam power generation cycles.
Hot reheat piping transports reheated steam under elevated-temperature conditions, while cold reheat piping operates under a different combination of temperature and pressure.
The two systems may require different material grades and wall thicknesses.
Hot Reheat Pipe Spools
Hot reheat piping may use suitable alloy steel grades selected for elevated-temperature service.
Fabrication requires careful consideration of welding procedures, heat treatment, inspection requirements, and dimensional accuracy.
Cold Reheat Pipe Spools
Cold reheat piping may involve different material and fabrication requirements depending on the plant design.
Womic Steel manufactures customized reheat piping assemblies according to the approved piping specifications.
Fabrication Considerations
Both systems may require:
- · Large-diameter pipe sections.
- · Heavy-wall piping components.
- · Complex elbows and reducers.
- · Customized branch connections.
- · Accurate equipment connection dimensions.
- · Controlled welding procedures.
- · Project-specific inspection and testing.
The final manufacturing arrangement is established during engineering review.
Boiler Feedwater Pipe Spool Manufacturing
Boiler feedwater systems transport water under pressure to steam-generating equipment.
Depending on the plant design, these systems may involve demanding pressure conditions and strict piping integrity requirements.
Womic Steel manufactures customized boiler feedwater pipe spools according to approved project drawings and applicable piping codes.
Typical Boiler Feedwater Piping Components
- · Straight pipe spool assemblies.
- · Flanged pipe sections.
- · Elbow and reducer spools.
- · Pump connection piping.
- · Valve connection spools.
- · Branch piping assemblies.
- · Customized equipment connection sections.
Quality Requirements
Boiler feedwater piping fabrication may require qualified welding procedures, dimensional verification, NDT, pressure testing, and detailed manufacturing records.
The material grade and inspection requirements are determined by the applicable design code and project specifications.
HRSG Piping Fabrication for Combined-Cycle Power Plants
Combined-cycle power plants commonly use heat recovery steam generators to recover heat from gas turbine exhaust and produce steam.
HRSG installations contain multiple piping systems operating under different temperature and pressure conditions.
Womic Steel supports the fabrication of customized HRSG piping assemblies for suitable applications.
Typical HRSG Piping Applications
|
Piping System |
Manufacturing Considerations |
| High-Pressure Steam Piping | Material selection, welding quality, heat treatment, and inspection |
| Intermediate-Pressure Steam Piping | Fabrication according to specified pressure and temperature conditions |
| Low-Pressure Steam Piping | Appropriate material and dimensional requirements |
| Feedwater Piping | Pressure piping integrity and equipment connection accuracy |
| Condensate Piping | Material compatibility and installation dimensions |
| Auxiliary Piping | Customized utility piping assemblies |
The final material selection and manufacturing requirements depend on the HRSG design and applicable engineering specifications.
Alloy Steel Materials for Power Plant Piping
Power generation piping systems may require materials with suitable elevated-temperature strength, creep resistance, toughness, and weldability.
Womic Steel can coordinate pipe spool fabrication using internationally recognized carbon steel and alloy steel materials.
Common Pipe Materials
|
Material Standard |
Grade |
Typical Power Generation Application |
| ASTM A106 / ASME SA106 | Grade B, Grade C | Suitable steam, feedwater, and utility piping |
| ASTM A335 / ASME SA335 | P11 | Selected high-temperature steam and industrial piping |
| ASTM A335 / ASME SA335 | P12 | Elevated-temperature power piping |
| ASTM A335 / ASME SA335 | P22 | Steam piping and high-temperature power plant systems |
| ASTM A335 / ASME SA335 | P91 | Advanced high-temperature steam piping |
| ASTM A335 / ASME SA335 | P92 | Selected advanced high-temperature power generation systems |
| ASTM A333 / ASME SA333 | Grade 6 | Specified low-temperature piping applications |
| ASTM A312 / ASME SA312 | TP304/304L, TP316/316L | Suitable stainless steel utility and process piping |
Material grades must be selected according to the actual design temperature, pressure, allowable stress, service environment, and governing code.
Matching Fittings and Flanges
Power plant pipe spools may incorporate fittings and flanges manufactured according to:
- · ASTM A234 / ASME SA234.
- · ASTM A105 / ASME SA105.
- · ASTM A182 / ASME SA182.
- · ASTM A403 / ASME SA403.
- · Other project-specified material standards.
For alloy steel piping, matching fitting and flange grades are selected according to the approved piping material class.
Applicable Power Piping Codes and Standards
Power plant pipe spool fabrication requires compliance with the applicable design code, material specifications, welding qualifications, and inspection requirements.
Womic Steel manufactures according to the approved project documentation.
|
Standard |
Application |
| ASME B31.1 | Power piping design, fabrication, examination, and testing |
| ASME B31.3 | Process piping where applicable |
| ASME BPVC Section IX | Welding procedure and welder qualification |
| ASME BPVC Section V | Nondestructive examination methods where invoked |
| ASTM A335 / ASME SA335 | Seamless ferritic alloy steel pipe for high-temperature service |
| ASTM A234 / ASME SA234 | Wrought carbon and alloy steel piping fittings |
| ASTM A182 / ASME SA182 | Forged or rolled alloy steel piping components |
| ASME B16.5 | Pipe flanges and flanged fittings |
| ASME B16.9 | Factory-made wrought butt-welding fittings |
| ASME B16.25 | Butt-welding end preparation |
| ASME B16.47 | Large-diameter steel flanges |
| EN 13480 | Metallic industrial piping where specified |
| ISO 15614 | Welding procedure qualification where applicable |
| ISO 9606 | Welder qualification where applicable |
The governing code depends on the piping system, project jurisdiction, equipment boundaries, and contractual specifications.
Specialized Welding for High-Temperature Power Piping
High-temperature alloy steel piping requires careful welding procedure control.
Womic Steel's pipe spool fabrication facility is supported by more than 50 internationally qualified welders.
Welding operations are performed according to the applicable approved WPS and supported by the required procedure and personnel qualification records.
Welding Procedure Considerations
Important factors include:
1. Base material grade.
2. Pipe diameter and wall thickness.
3. Welding process.
4. Welding consumable classification.
5. Joint preparation.
6. Preheat temperature.
7. Interpass temperature.
8. Welding heat input where specified.
9. Post-weld heat treatment requirements.
10. Mechanical and hardness testing requirements.
Welding Methods
Depending on the qualified welding procedure, suitable welding processes may include:
GTAW / TIG: Frequently used for controlled root welding and specified high-integrity piping joints.
SMAW: Commonly applied to industrial alloy steel piping when supported by the approved welding procedure.
GMAW / FCAW: Used where the welding process and consumables meet the project requirements.
SAW: May be suitable for certain large-diameter and heavy-wall piping applications.
The final welding process is selected according to the material grade, joint configuration, and approved qualification scope.
P91 and P92 Pipe Spool Fabrication Requirements
P91 and P92 are advanced heat-resistant alloy steel grades used in selected high-temperature power generation systems.
Their long-term performance depends on controlled material chemistry, heat treatment condition, welding procedures, and the resulting microstructure.
P91 Pipe Spool Fabrication
ASTM A335 P91 is a modified 9Cr-1Mo alloy steel containing controlled additions of elements such as vanadium and niobium.
P91 piping fabrication requires careful control of welding parameters and post-weld heat treatment.
P92 Pipe Spool Fabrication
ASTM A335 P92 is an advanced heat-resistant alloy steel containing chromium, tungsten, molybdenum, vanadium, and niobium.
P92 piping is used in selected high-temperature applications where its properties meet the engineering design requirements.
Critical Manufacturing Controls
For P91 and P92 piping projects, Womic Steel reviews:
- · Material grade verification.
- · Material heat treatment condition.
- · Welding procedure qualification.
- · Welding consumable selection.
- · Preheat requirements.
- · Interpass temperature limits.
- · Cooling requirements.
- · PWHT procedures.
- · Hardness acceptance criteria.
- · NDT requirements.
- · Material and weld traceability.
The approved welding and heat treatment procedures must be suitable for the specific material grade and project requirements.
Post-Weld Heat Treatment for Power Plant Pipe Spools
Post-weld heat treatment is an important manufacturing operation for many alloy steel power piping systems.
Depending on the material grade, wall thickness, design code, and project specification, PWHT may be required to achieve the specified welded joint properties.
For advanced heat-resistant materials, the correct heat treatment cycle is especially important.
PWHT Planning and Control
Where required, Womic Steel can coordinate:
1. Review of the approved heat treatment procedure.
2. Verification of the specified temperature range.
3. Control of heating and cooling rates.
4. Monitoring of holding temperature and duration.
5. Temperature measurement arrangements.
6. Recording of heat treatment charts.
7. Post-treatment inspection.
8. Hardness testing where specified.
9. Final heat treatment documentation.
PWHT temperatures and holding times must be established according to the applicable code, qualified welding procedure, and approved project specification.
Generic heat treatment schedules should not be substituted for the required engineering review.
Hardness Testing and Weld Metallurgical Quality
Hardness testing may be required for alloy steel power piping to verify that the welded joint meets specified acceptance criteria.
For applicable projects, hardness measurements may be performed on:
- · Weld metal.
- · Heat-affected zone.
- · Base material.
The required testing method, location, and acceptance limits depend on the material grade, governing code, and project specification.
For P91 and P92 piping, hardness results must be interpreted together with the welding procedure, PWHT records, and other relevant quality information.
Additional metallurgical examination may be specified for critical applications.
Non-Destructive Testing and Inspection
Power plant piping projects may require extensive inspection because piping integrity is critical to plant operation.
Womic Steel supports project-specific inspection and testing according to the approved ITP and applicable design code.
|
Inspection / Test |
Purpose |
| Visual Testing (VT) | Examination of weld appearance and visible discontinuities |
| Radiographic Testing (RT) | Examination of applicable welds for internal discontinuities |
| Ultrasonic Testing (UT) | Examination of applicable welds using specified techniques |
| Magnetic Particle Testing (MT) | Examination of suitable ferromagnetic materials |
| Liquid Penetrant Testing (PT) | Detection of surface-breaking discontinuities |
| Positive Material Identification (PMI) | Verification of specified alloying elements |
| Hardness Testing | Verification against specified hardness limits |
| Dimensional Inspection | Confirmation of spool geometry and connection dimensions |
| PWHT Record Review | Verification of required heat treatment cycles |
| Hydrostatic Testing | Pressure integrity verification where required |
| Third-Party Inspection | Independent verification according to the agreed scope |
Inspection methods, examination percentages, acceptance criteria, and witness requirements are established by the project specifications.
Dimensional Accuracy and Turbine Connection Piping
Power plant piping assemblies must connect accurately with boilers, turbines, pumps, valves, and other equipment.
Dimensional deviations can create installation difficulties and may introduce undesirable loads at equipment connections.
Womic Steel incorporates dimensional inspection according to the approved fabrication drawings and project requirements.
Typical inspection points include:
1. Overall spool dimensions.
2. Center-to-center distances.
3. Face-to-face dimensions.
4. Flange alignment and orientation.
5. Branch connection locations.
6. Elbow and reducer positioning.
7. Pipe end preparation.
8. Equipment connection dimensions.
9. Specified fabrication tolerances.
For complex piping assemblies, suitable fixtures and measurement methods can be used to support dimensional control.
Large-Diameter and Heavy-Wall Power Piping Fabrication
Power generation projects may require large-diameter piping for steam systems, cooling water, and other industrial services.
Heavy-wall alloy steel piping may also be specified for high-pressure and elevated-temperature applications.
Womic Steel supports customized large-diameter and heavy-wall power plant pipe spool fabrication.
Engineering Review Considerations
Our team evaluates:
- · Pipe diameter and wall thickness.
- · Material grade.
- · Spool geometry.
- · Welding joint preparation.
- · Welding process and consumables.
- · Preheat and PWHT requirements.
- · NDT accessibility.
- · Dimensional tolerances.
- · Assembly weight.
- · Workshop handling requirements.
- · Export packaging and transportation limitations.
Maximum fabrication dimensions and assembly weights are confirmed according to the actual project requirements.
Material Traceability and Quality Documentation
Power generation EPC projects often require extensive manufacturing records.
Womic Steel can organize project-specific documentation according to the agreed requirements.
|
Document |
Typical Content |
| Approved Fabrication Drawings | Spool configuration and drawing revision information |
| Material Test Certificates | Material properties and specification compliance |
| Material Traceability Records | Identification of pipes, fittings, and flanges |
| WPS / PQR | Welding procedure and qualification documentation |
| Welder Qualification Records | Applicable personnel qualification records |
| Weld Maps | Weld identification and traceability |
| NDT Reports | Examination results and acceptance records |
| PMI Reports | Alloy verification where required |
| Hardness Test Reports | Hardness verification where specified |
| PWHT Reports | Heat treatment records where applicable |
| Dimensional Reports | Fabricated spool measurement results |
| Pressure Test Reports | Required pressure testing records |
| Third-Party Inspection Reports | Independent inspection documentation |
| Final Manufacturing Dossier | Consolidated project quality records |
Documentation requirements should be agreed upon before fabrication to ensure that the necessary inspection and recording activities are incorporated into the production plan.
Production Capacity and EPC Project Delivery
Womic Steel operates its own pipe spool fabrication facility with an annual production capacity of approximately 20,000 metric tons.
Our manufacturing resources are supported by more than 50 internationally qualified welders.
For power generation projects, production planning can be organized according to:
1. Approved drawing release schedules.
2. Material availability.
3. Piping system classifications.
4. Spool identification numbers.
5. Welding and heat treatment requirements.
6. Inspection milestones.
7. Equipment installation priorities.
8. Shipping batches.
9. Customer delivery schedules.
Phased Manufacturing
Large power plant projects may require piping assemblies to be delivered in stages.
Womic Steel can coordinate production and shipment batches according to the agreed construction schedule.
This approach supports more organized site receiving, storage, and installation activities.
Third-Party Inspection and International Project Requirements
Womic Steel can coordinate third-party inspection according to customer requirements.
For applicable projects, inspection activities may involve independent inspection organizations or classification society representatives.
Womic Steel has experience with international classification society requirements and maintains referenced credentials associated with ABS, BV, DNV, LR, GL, RINA, CCS, KR, and NK.
Where classification society involvement is required, the applicable approval scope, manufacturing site, product category, and project survey conditions must be reviewed before confirming certification arrangements.
For conventional power generation projects, third-party inspection requirements are typically established by the project owner, EPC contractor, and applicable engineering specifications.
Surface Treatment and Preservation
Power plant pipe spools may require different surface treatment systems depending on material grade, installation environment, operating temperature, and corrosion conditions.
For carbon steel piping, Womic Steel can arrange project-specified surface preparation and protective coating systems.
For alloy steel and stainless steel piping, surface treatment and preservation requirements are reviewed according to the material grade and intended service.
Typical arrangements may include:
- · Surface cleaning.
- · Temporary rust prevention where suitable.
- · Project-specified protective coating.
- · Flange face protection.
- · Pipe end closures.
- · Protective wrapping.
- · Identification and traceability marking.
- · Coating inspection where required.
For high-temperature piping, protective coating systems must be compatible with the actual operating temperature.
Export Packaging and International Logistics
Power plant pipe spools may be heavy, irregularly shaped, and difficult to transport.
Womic Steel provides export packaging arrangements based on spool dimensions, weight, material condition, and project requirements.
Packaging solutions may include:
1. Customized steel transport frames.
2. Wooden saddles and support structures.
3. Protective covers for flange faces.
4. Pipe end caps and temporary closures.
5. Bracing for projecting branches.
6. Protective wrapping and preservation.
7. Spool identification tags.
8. Packing lists organized by piping system and spool number.
Depending on cargo dimensions and weight, transportation may involve standard containers, open-top containers, flat-rack containers, or breakbulk shipment.
Womic Steel can coordinate international freight arrangements and phased deliveries according to the customer's project schedule.
Why Choose Womic Steel for Power Plant Pipe Spool Fabrication?
|
Womic Steel Capability |
Customer Benefit |
| In-House Pipe Spool Manufacturing | Direct production control and quality management |
| Approximately 20,000 MT Annual Fabrication Capacity | Support for substantial power plant piping packages |
| More Than 50 Internationally Qualified Welders | Welding resources for demanding fabrication requirements |
| Alloy Steel Material Supply | Coordination of P11, P22, P91, P92, and other specified materials |
| High-Temperature Piping Fabrication | Support for steam and elevated-temperature piping projects |
| PWHT and Hardness Testing Coordination | Project-specific heat treatment and quality verification |
| Welding and NDT Management | Controlled fabrication and inspection |
| Large-Diameter and Heavy-Wall Fabrication | Evaluation of demanding piping configurations |
| Material Traceability | Organized manufacturing and inspection records |
| International Logistics Experience | Export packaging and freight coordination |
Womic Steel combines integrated material supply, in-house manufacturing, qualified welding resources, project quality management, and international logistics capabilities to provide dependable pipe spool fabrication solutions for power generation projects.
Request a Quotation for Power Plant Pipe Spools
Womic Steel welcomes inquiries from power generation EPC contractors, thermal power plant operators, combined-cycle power plant developers, HRSG manufacturers, boiler equipment manufacturers, engineering companies, and international industrial customers.
To prepare an accurate quotation, please provide:
1. Pipe spool isometric drawings or fabrication drawings.
2. Bill of materials and spool quantities.
3. Required material grades and piping classes.
4. Pipe outside diameters, wall thicknesses, and pressure ratings.
5. Applicable design codes and project specifications.
6. Welding procedure and qualification requirements.
7. Preheat and PWHT requirements.
8. NDT, PMI, hardness, and pressure testing requirements.
9. Third-party inspection and documentation requirements.
10. Surface treatment and preservation specifications.
11. Delivery schedule, destination port, and preferred Incoterms.
Our engineering and commercial teams will review your project requirements and prepare a suitable manufacturing and delivery proposal.
Womic Steel Group – Professional Pipe Spool Manufacturer for Power Plants, High-Pressure Steam Systems, HRSG Installations and Industrial EPC Projects.
Contact Womic Steel
Website: www.womicsteel.com
Email: sales@womicsteel.com
Tel / WhatsApp / WeChat: Victor +86-15575100681 or Jack +86-18390957568










