Modular Pipe Spool Fabrication & Skid-Mounted Piping Assemblies Manufacturer

Short Description:

Custom Prefabricated Piping Modules, Equipment Connection Spools, Process Skid Piping and Complex Industrial Piping Assemblies for Oil & Gas, Petrochemical, Offshore, Power Generation and EPC Projects


Product Detail

Product Tags

Product Description

Integrated Modular Piping Fabrication Solutions by Womic Steel Group

Womic Steel Group is a professional manufacturer and international supplier of modular pipe spools, skid-mounted piping assemblies, prefabricated process piping modules, equipment connection pipe spools, and customized industrial piping fabrication solutions.

We provide manufacturing services for engineering projects requiring complex piping configurations, accurate equipment connections, multiple material grades, coordinated welding procedures, and efficient installation planning.

Modular piping fabrication is an important part of modern industrial construction. Instead of manufacturing and assembling every piping component at the project site, piping sections can be prefabricated in a controlled workshop environment and delivered as organized assemblies for installation.

This approach can reduce field welding, improve dimensional control, simplify inspection activities, and support more efficient project construction.

Modular piping assemblies are widely used in oil and gas processing facilities, petroleum refineries, petrochemical plants, offshore platforms, FPSO projects, power generation facilities, chemical processing plants, and industrial equipment skids.

Womic Steel operates its own dedicated pipe spool fabrication facility with an annual manufacturing capacity of approximately 20,000 metric tons, supported by more than 50 internationally qualified welders.

Our manufacturing capabilities cover carbon steel, stainless steel, alloy steel, duplex stainless steel, and super duplex stainless steel piping assemblies, subject to approved project specifications and applicable manufacturing procedures.

Through integrated material procurement, in-house fabrication, welding quality management, dimensional inspection, project documentation, and international logistics coordination, Womic Steel provides comprehensive manufacturing solutions for modular piping and EPC projects.

Modular Pipe Spool and Skid Piping Product Range

Womic Steel manufactures customized modular piping assemblies according to approved isometric drawings, fabrication drawings, piping specifications, and project requirements.

Product Category

Manufacturing Description

Modular Pipe Spool Assemblies Prefabricated piping sections designed for integration into industrial modules
Skid-Mounted Piping Assemblies Customized piping arrangements for installation on equipment skids
Process Piping Modules Prefabricated piping assemblies for industrial process systems
Equipment Connection Spools Precision-fabricated connections for pumps, compressors, vessels, and heat exchangers
Multi-Branch Piping Assemblies Complex piping configurations incorporating tees and branch connections
Piping Header Assemblies Customized distribution and collection piping systems
Flanged Modular Pipe Spools Piping assemblies incorporating specified flange connections
Stainless Steel Modular Piping Corrosion-resistant piping assemblies for compatible process applications
Alloy Steel Modular Piping High-temperature piping assemblies for suitable industrial systems
Duplex and Super Duplex Modular Piping Corrosion-resistant piping for selected offshore and industrial applications
Large-Diameter Modular Spools Large-bore piping assemblies for industrial modules
Heavy-Wall Modular Piping Thick-wall piping assemblies requiring controlled welding procedures

The final manufacturing configuration is determined by the approved project drawings, material specifications, dimensional tolerances, and inspection requirements.

What Is Modular Pipe Spool Fabrication?

Modular pipe spool fabrication involves manufacturing piping assemblies in a workshop before installation into larger industrial modules or equipment packages.

A modular piping assembly may include:

  • · Straight pipe sections.
  • · Elbows and reducers.
  • · Tees and branch connections.
  • · Flanged connections.
  • · Equipment connection interfaces.
  • · Pipe supports or attachment provisions where specified.
  • · Customized piping headers.
  • · Multiple interconnected spool sections.

The objective is to manufacture piping assemblies that can be integrated into the final equipment module with minimal field modification.

Benefits of Modular Pipe Spool Prefabrication

Reduced Field Welding: More welding can be completed in a controlled workshop environment.

Improved Dimensional Accuracy: Fabrication dimensions can be verified before shipment.

Better Inspection Accessibility: Workshop fabrication can provide improved access for welding inspection and dimensional measurement.

Simplified Installation: Prefabricated assemblies can reduce the number of individual components requiring installation at the project site.

Project Schedule Coordination: Fabrication can be organized according to module construction and installation priorities.

Actual project benefits depend on the module design, installation conditions, fabrication scope, and construction plan.

Skid-Mounted Piping Assemblies for Industrial Equipment

Skid-mounted equipment packages are widely used in industrial facilities because they allow equipment and associated piping to be organized into compact modular units.

Typical skid-mounted equipment may include pumps, compressors, heat exchangers, filters, separators, and other process equipment.

Womic Steel manufactures customized piping assemblies intended for integration into skid-mounted systems.

Typical Skid Piping Applications

Equipment Type

Piping Fabrication Requirements

Pump Skids Suction and discharge piping connections
Compressor Skids Process and auxiliary piping connections
Heat Exchanger Skids Inlet, outlet, and utility piping assemblies
Filtration Skids Customized process piping and manifold arrangements
Chemical Injection Skids Specified small-bore and process piping assemblies
Gas Processing Skids Customized piping connections for gas treatment equipment
Cooling Water Skids Piping assemblies for cooling and heat exchange systems
Utility Skids Piping for suitable compressed air, water, and auxiliary services

The applicable material grade, design code, pressure rating, and inspection requirements depend on the equipment package and service conditions.

Complex Three-Dimensional Pipe Spool Fabrication

Modular piping assemblies often involve complex three-dimensional configurations.

Unlike simple straight pipe spools, these assemblies may include multiple elbows, reducers, branch connections, and flanged interfaces arranged within restricted spaces.

Maintaining dimensional accuracy is essential for successful integration into the final module.

Manufacturing Challenges

Complex piping assemblies may require:

1. Accurate interpretation of isometric drawings.

2. Verification of equipment connection dimensions.

3. Controlled cutting and bevel preparation.

4. Precise fit-up and alignment.

5. Welding sequence planning.

6. Distortion control.

7. Intermediate dimensional inspection.

8. Final connection interface verification.

9. Suitable handling and transportation arrangements.

Womic Steel reviews these requirements during the technical quotation and fabrication planning stages.

Equipment Connection Accuracy and Interface Control

Equipment connection spools are critical components of modular piping systems.

These spools connect piping networks to pumps, compressors, vessels, heat exchangers, and other industrial equipment.

Dimensional deviations can create installation difficulties and may introduce undesirable loads at equipment nozzles.

Womic Steel can incorporate dimensional inspection into the fabrication process.

Typical Inspection Points

  • · Overall spool dimensions.
  • · Center-to-center distances.
  • · Face-to-face dimensions.
  • · Flange orientation.
  • · Flange face alignment.
  • · Branch connection locations.
  • · Elbow and reducer positioning.
  • · Pipe end preparation.
  • · Equipment connection dimensions.
  • · Specified fabrication tolerances.

For complex assemblies, suitable fixtures and measurement methods can be used to support dimensional control.

Modular Piping Materials

Womic Steel can coordinate fabrication using a broad range of internationally recognized piping materials.

Material Category

Common Specifications and Grades

Typical Applications

Carbon Steel ASTM A106 Gr.B/C, ASTM A53 Gr.B Industrial process and utility piping
Line Pipe Materials API 5L Gr.B, X42, X52, X60, X65 Suitable pipeline facility and industrial piping
Low-Temperature Carbon Steel ASTM A333 Gr.6 Specified low-temperature piping
Alloy Steel ASTM A335 P5, P9, P11, P22 High-temperature industrial piping
Advanced Alloy Steel ASTM A335 P91, P92 Specialized high-temperature piping
Austenitic Stainless Steel ASTM A312 TP304/304L, TP316/316L Corrosion-resistant process piping
Duplex Stainless Steel UNS S31803, S32205 Selected chloride-containing environments
Super Duplex Stainless Steel UNS S32750, S32760 Demanding corrosion-resistant applications

Matching fittings and flanges are selected according to the approved piping material class.

The final material selection depends on the design temperature, pressure, operating medium, corrosion conditions, and governing engineering code.

Applicable Standards and Project Specifications

Modular pipe spool fabrication must comply with the applicable engineering design code, material specifications, welding qualifications, and inspection requirements.

Womic Steel manufactures according to the approved project documentation.

Standard

Application

ASME B31.3 Process piping fabrication and testing
ASME B31.1 Power piping requirements where applicable
ASME BPVC Section IX Welding procedure and welder qualification
ASME BPVC Section V Nondestructive examination methods where invoked
ASME B16.5 Pipe flanges and flanged fittings
ASME B16.9 Factory-made wrought butt-welding fittings
ASME B16.25 Butt-welding end preparation
ASME B16.47 Large-diameter steel flanges
ASTM / ASME Material Standards Pipe, fitting, and flange requirements
EN 13480 Metallic industrial piping where specified
ISO 15614 Welding procedure qualification where applicable
ISO 9606 Welder qualification where applicable

The governing code and acceptance criteria are established by the approved project specifications.

In-House Modular Pipe Spool Fabrication Process

Womic Steel performs pipe spool fabrication in its own manufacturing facility.

This allows direct coordination between material preparation, welding operations, inspection activities, and production scheduling.

Engineering Review

Before production, our technical team reviews the customer's isometric drawings, fabrication drawings, material specifications, and inspection requirements.

Special attention is given to module dimensions, equipment interfaces, welding access, inspection feasibility, and transportation limitations.

Material Preparation

Pipes, fittings, flanges, and other components are prepared according to the approved bill of materials.

Incoming materials are checked for specification compliance, identification, dimensional requirements, and relevant material certificates.

Cutting and Bevel Preparation

Pipes are cut according to the approved fabrication dimensions.

Suitable cutting and beveling methods are selected based on pipe diameter, wall thickness, material grade, and welding requirements.

Fit-Up and Assembly

Piping components are positioned and aligned according to the approved spool drawings.

Temporary supports and fixtures may be used to maintain alignment and reduce distortion during welding.

Welding

Welding is performed according to the approved WPS.

For complex assemblies, welding sequence and distortion control are carefully reviewed.

Inspection and Testing

Welds are examined according to the project ITP and applicable acceptance criteria.

Dimensional inspection and additional testing are performed as required.

Surface Treatment

After inspection and acceptance, pipe spools receive the specified surface treatment and preservation.

Packaging and Shipment

Completed assemblies are prepared for transportation using suitable supports, protective materials, and export packaging arrangements.

Welding Quality Management for Modular Piping

Modular piping projects may involve numerous welded joints across multiple material grades and piping classes.

Effective welding quality management is essential for maintaining traceability, inspection records, and production progress.

Womic Steel's fabrication workshop is supported by more than 50 internationally qualified welders.

Welding operations are performed according to the applicable approved WPS and supported by the required qualification records.

Welding Control Requirements

Key considerations include:

1. Welding procedure qualification.

2. Welder qualification verification.

3. Welding consumable selection.

4. Material identification.

5. Joint preparation and fit-up.

6. Preheat and interpass temperature control where required.

7. Welding sequence.

8. Heat treatment requirements.

9. Visual inspection.

10. NDT examination.

11. Repair and re-examination procedures.

12. Weld documentation.

Weld Maps and Weld Identification

For projects requiring detailed welding traceability, weld maps can be prepared to identify individual production welds.

Each weld identification number may be linked to the relevant spool drawing, material records, welding procedure, inspection results, and other required documentation.

Non-Destructive Testing and Quality Assurance

Modular piping assemblies may require extensive inspection because of their complexity and intended service conditions.

Womic Steel supports project-specific inspection and testing according to the approved ITP.

Inspection / Test

Purpose

Visual Testing (VT) Examination of weld appearance and visible discontinuities
Radiographic Testing (RT) Examination of applicable welds for internal discontinuities
Ultrasonic Testing (UT) Examination of applicable welds using specified techniques
Magnetic Particle Testing (MT) Examination of suitable ferromagnetic materials
Liquid Penetrant Testing (PT) Detection of surface-breaking discontinuities
Positive Material Identification (PMI) Verification of specified alloying elements
Hardness Testing Verification against specified hardness requirements
Dimensional Inspection Confirmation of spool geometry and connection dimensions
Hydrostatic Testing Pressure integrity verification where required
Coating Inspection Verification of specified surface preparation and coating requirements
Third-Party Inspection Independent verification according to the agreed scope

Inspection methods, examination percentages, acceptance criteria, and witness requirements are established by the project specifications.

Modular Piping for Oil & Gas Projects

Oil and gas facilities frequently use modular construction to improve project efficiency and reduce field fabrication activities.

Womic Steel manufactures customized modular pipe spools for suitable oil and gas applications.

Typical applications may include:

  • · Refinery process modules.
  • · Petrochemical process skids.
  • · Natural gas processing equipment.
  • · Compressor station piping.
  • · Pump and filtration skids.
  • · Utility piping modules.
  • · Equipment connection assemblies.

Material selection and manufacturing requirements depend on the actual service conditions.

Modular Piping for Offshore and FPSO Projects

Offshore platforms and FPSO facilities often have restricted installation spaces and demanding construction schedules.

Modular piping assemblies can help reduce onboard fabrication and improve installation readiness.

Womic Steel supports customized offshore modular pipe spool fabrication according to approved project drawings and specifications.

For applicable projects, our team can coordinate inspection arrangements and manufacturing documentation according to the relevant classification society requirements.

Womic Steel has experience with international classification society requirements and maintains referenced credentials associated with ABS, BV, DNV, LR, GL, RINA, CCS, KR, and NK.

Classification society certification is subject to the applicable approval scope, manufacturing location, product category, and project survey requirements.

Modular Piping for Power Generation

Power generation facilities may require modular piping assemblies for steam systems, cooling water, and auxiliary equipment.

Womic Steel supports customized power plant modular pipe spool fabrication according to approved engineering requirements.

Applications may include:

  • · HRSG piping modules.
  • · Boiler auxiliary piping.
  • · Cooling water skids.
  • · Pump connection piping.
  • · Heat exchanger piping.
  • · Auxiliary steam systems.

The applicable material grade, welding procedure, and inspection requirements are established by the project design.

Production Capacity and EPC Project Support

Womic Steel operates its own pipe spool fabrication facility with an annual production capacity of approximately 20,000 metric tons.

Our manufacturing resources are supported by more than 50 internationally qualified welders.

This capability supports customized modular piping assemblies and substantial industrial piping packages.

For large EPC projects, production can be organized according to:

1. Approved drawing release schedules.

2. Material availability.

3. Piping system classifications.

4. Spool identification numbers.

5. Welding and inspection requirements.

6. Heat treatment schedules.

7. Inspection release status.

8. Installation priorities.

9. Shipping batches.

10. Customer delivery milestones.

Phased Fabrication and Delivery

Large projects may require piping assemblies to be delivered in stages.

Womic Steel can coordinate production and shipment batches according to the agreed construction schedule.

Material Traceability and Manufacturing Documentation

Modular piping projects may require extensive quality documentation.

Womic Steel can organize project-specific manufacturing records according to the agreed requirements.

Document

Typical Content

Approved Fabrication Drawings Spool configuration and drawing revision information
Material Test Certificates Material properties and specification compliance
Material Traceability Records Identification of pipes, fittings, and flanges
WPS / PQR Welding procedure and qualification documentation
Welder Qualification Records Applicable personnel qualification records
Weld Maps Weld identification and traceability
NDT Reports Examination results and acceptance records
PMI Reports Alloy verification where required
Hardness Test Reports Hardness verification where specified
PWHT Reports Heat treatment records where applicable
Dimensional Reports Fabricated spool measurement results
Pressure Test Reports Required pressure testing records
Third-Party Inspection Reports Independent inspection documentation
Final Manufacturing Dossier Consolidated project quality records

Documentation requirements should be agreed upon before fabrication.

Surface Treatment and Preservation

Modular pipe spools may require different surface treatment systems depending on material grade, installation environment, and operating conditions.

For carbon steel piping, Womic Steel can arrange project-specified surface preparation and protective coating systems.

For stainless steel and duplex piping, surface treatment focuses on suitable cleaning, contamination prevention, and preservation of corrosion-resistant surfaces.

Typical arrangements may include:

  • · Abrasive blast cleaning for suitable carbon steel components.
  • · Project-specified primer and protective painting systems.
  • · Temporary preservation during storage and transportation.
  • · Flange face protection.
  • · Pipe end closures.
  • · Protective wrapping.
  • · Surface cleaning and finishing for stainless steel materials.
  • · Coating inspection where required.

The final surface protection system is selected according to the approved project specification.

Export Packaging and International Transportation

Modular piping assemblies may be heavy, irregularly shaped, and difficult to transport.

Womic Steel provides export packaging and logistics coordination based on project requirements.

Packaging Solutions

1. Customized steel transport frames.

2. Wooden saddles and support structures.

3. Protective covers for flange faces.

4. Pipe end caps and temporary closures.

5. Bracing for projecting branches.

6. Protective wrapping and preservation.

7. Spool identification tags.

8. Packing lists organized by piping system and spool number.

Transportation Methods

Depending on cargo dimensions and weight, transportation may involve:

  • · Standard containers.
  • · Open-top containers.
  • · Flat-rack containers.
  • · Breakbulk shipment.
  • · Other suitable heavy cargo transportation arrangements.

For oversized piping assemblies, transportation planning must consider loading dimensions, weight distribution, securing requirements, port handling conditions, and destination restrictions.

Womic Steel can coordinate international freight arrangements and phased deliveries according to the customer's project schedule.

Why Choose Womic Steel for Modular Pipe Spool Fabrication?

Womic Steel Capability

Customer Benefit

In-House Pipe Spool Manufacturing Direct production control and quality management
Approximately 20,000 MT Annual Fabrication Capacity Support for substantial industrial piping packages
More Than 50 Internationally Qualified Welders Welding resources for demanding fabrication requirements
Complex Three-Dimensional Fabrication Customized piping assemblies for restricted installation spaces
Equipment Connection Accuracy Improved installation readiness
Multiple Material Capabilities Carbon steel, stainless steel, alloy steel, duplex, and super duplex piping
Welding and NDT Management Project-specific quality assurance
Material Traceability Organized manufacturing and inspection records
Modular Piping Project Support Coordination with equipment and module installation requirements
International Logistics Experience Export packaging and freight coordination

Womic Steel combines integrated material supply, in-house manufacturing, qualified welding resources, project quality management, and international logistics capabilities to provide dependable modular pipe spool fabrication solutions.

Request a Quotation for Modular Pipe Spools

Womic Steel welcomes inquiries from EPC contractors, industrial equipment manufacturers, offshore contractors, power generation companies, engineering companies, and international piping distributors.

To prepare an accurate quotation, please provide:

1. Pipe spool isometric drawings or fabrication drawings.

2. Module general arrangement drawings where applicable.

3. Bill of materials and spool quantities.

4. Required material grades.

5. Pipe outside diameters and wall thicknesses.

6. Equipment connection dimensions and interface requirements.

7. Applicable design codes and project specifications.

8. Welding procedure and qualification requirements.

9. NDT, PMI, hardness, and pressure testing requirements.

10. PWHT requirements where applicable.

11. Third-party inspection and documentation requirements.

12. Surface treatment and preservation specifications.

13. Delivery schedule, destination port, and preferred Incoterms.

Our engineering and commercial teams will review your project requirements and prepare a suitable manufacturing and delivery proposal.

Womic Steel Group – Professional Modular Pipe Spool and Skid-Mounted Piping Manufacturer for Industrial EPC Projects.

Contact Womic Steel

Website: www.womicsteel.com
Email: sales@womicsteel.com
Tel / WhatsApp / WeChat: Victor +86-15575100681 or Jack +86-18390957568